Amber Alarm
The Amber Business Solutions IoT alarm communicator was designed to meet all regular requirements from a security alarm control panel. It operates on the Amber Alarm platform in the 868 MHz frequency range. The radio incorporates a dual-tone multi-frequency (DTMF) decoder that connects directly to the public switched telephone network (PSTN) output of an alarm control panel that supports the Contact ID message protocol. The product also incorporates four discrete (make to ground) inputs to sense any external triggers (for example panic, alarm, fire, medical) in the event that the PSTN output is not available.
Product Features
Supply voltage
Battery backup
Average power consumption
RF Power
PSTN input
Discrete trigger inputs
Analogue input
Trigger outputs
Geo-location
Time to fix
Sensitivity for GPS / GLONASS
Serial port
: 8 to 16 VDC
: 3.4 to 4.6 VDC input for backup battery operation 1
: Sleep mode - 3 mA, Run mode with GPS receiver on: 40 mA, Transmit mode with GPS receiver on: 105 mA
: Model 1E - Class 0u (12 dBm - EIRP - 16 dBm), Model 1I: Class 1u (7 dBm - EIRP - 12 dBm)
: Two wire (Ring and Tip) input with support for Contact ID message protocol
: Four discrete trigger (ground to make) inputs that can be configured for any ON/OFF function required
: One analogue input (3 VDC reference)
: Two open collector outputs with protection to switch a relay
: Support for GPS and GLONASS, 72 acquisition and tracking channels
: From cold start: 26 s, Reacquisition time: 1 s
: Cold start -148 dBm, Tracking and navigation: -167 dBm
: One Transistor-transistor Logic (TTL) bi-directional serial port that is able to interpret a comprehensive set of AT commands for board control and configuration
Physical Specification
Dimensions
: 95 mm x 61 mm x 17 mm with mounting holes
210 Amarand Ave, 3rd Floor,
+27 12 483-8600
